Blog

Follow our blog to keep informed about Woder

How To Choose My Woder Filter Under My Sink (by its model name)?

cabinet-contemporary-counter-1080721

How To Choose My Woder Filter Under My Sink (by its model name)?

Takes just 10 to 15 minutes to install under your sink. No special tools or training required. Woder connects directly to existing, standard plumbing.

Capacity:

10K – Because it can filter 10,000 gallons of water.
5K – Because it can filter 5,000 gallons of water.

Fittings:

DC – Direct Connect to existing kitchen / bathroom faucet. Come with inlet hose – 3/8 female compression by 1/4 standard pipe thread, outlet hose- 3/8 m compression by 1/4 standard pipe, clip and screw. (in accordance with the US Building Code).

Types:
S-Types / FRM (For Fluoride Removal) – Come with Head with a built-in valve/s for replacement cartridges. Can Be DC (under sink) or JG (inline).
Cap-Types – Cannot get replacement cartridges and must be replaced as a whole unit.

Filtration abilities:

All models – Eliminates lead (99.9%), heavy metals, chlorine (99.9%), chromium 6, mercury, volatile organic compounds, carcinogens, and other contaminants, as well as turbidity, odors and bad tastes, so you and your family enjoy pure, healthy, spring-fresh water from the tap.

FRM – Fluoride Removal Dual Stage Filters – Removes up to 95% of Fluoride in addition to the above.

Replacement Cartridges:
All 5K Models gets the Gen3-Q8-R
All 5K FRM Models gets FRM-Q8-R (1st Stage) and Gen3-Q8-R (2nd Stage)
All 10K Models gets the Gen3-Q12-R
All 10K FRM Models gets FRM-Q12-R (1st Stage) and Gen3-Q12-R (2nd Stage)