Product Specifications
Flow Rate : 3GPM @ 65psig
Product Dimensions
4,000 gal capacity : 4″ D x 3″ W x 10″ H
 |
WQA-Certified
Woder Advanced filters are certified by WQA to NSF/ANSI 42 for Chlorine taste, odor and NSF/ANSI 372 for lead free compliance as verified and substantiated by test data. |
System includes: WD-4K filter, inlet and outlet welded in 1/4″ John Guest fittings, mounting clip and screws. Fits All 1/4″ Plastic Flex Tubing and Flexible Copper Tubing used for water supply to ice makers and refrigerators, etc. 1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” Tube. DOES NOT FIT BRAIDED HOSES
Common applications includes; POU (Point of use) inline water filter for refrigerators, dedicated filtered water faucets (under sink), RVs
Our Woder WD-4K-JG filter removes 99.9% of lead, heavy metals, chlorine, chromium 6, mercury, volatile organic compounds, carcinogens, and other contaminants – as well as turbidity, odor and bad taste. Lasts up to 3 years, depending on the levels of sediment found in your tap water.
Selective Filtration™
Our proprietary Selective Filtration™ technology removes 99.9% of contaminants while leaving in all essential minerals. Reverse Osmosis (RO) filters also remove 99.9% of contaminants, however, RO also remove ALL the minerals found in tap water – including minerals your body needs. RO systems can waste thousands of gallons of water annually while flushing out contaminants down the drain.
Preventing Sediment Buildup
If your water supply contains elevated levels of sediment, a dual-stage Sediment Removal Filter System is recommended to prevent decreased filter life due to particulate buildup within the filter. Rust from old plumbing, upstream construction contributing to excess sediment finding its way into your water supply, and water supplies with high levels of sand and contaminants can all result in water conditions not suitable for a single-stage filter system.