Concerned about Fluoride? Woder has a special filter for you
Enjoy fluoride-free water on tap. The ideal filter for people who don’t want municipal fluoride in their drinking water. The Woder 10K-FRM-JG-1/4 Removes 95% of Fluoride and eliminates lead (99.9%), heavy metals, chlorine (99.9%), chromium 6, mercury, volatile organic compounds, carcinogens, and other contaminants, as well as turbidity, odors and bad tastes. So you and your family enjoy pure, healthy, spring-fresh water from the tap.
This filter should be used in conjunction with municipally treated drinking water or water that has been properly disinfected prior use.
LASTS FOR A MINIMUM OF 2 YEARS OR 10,000 GALLONS Notes: For longest life, use with municipal treated cold water only, not well water. Do not use with salty or softened water. Connects for use only with cold water for drinking.
Main Application Inline Water Filter for All Residential and Commercial Major Brands of Refrigerators, Ice Makers and RVs That Use Standard 1/4” Tubing (Unbraided).
FITS ALL 1/4″ PVC / Copper WATER SUPPLY TUBING. FITS 1/8″ PEX TUBING. DOES NOT FIT BRAIDED HOSES.
List of Inventory Includes: Filters (stage1 FRM-Q12-R and stage2 Gen3-Q12-R Cartridges), Dual head with a built-in valves, inlet 1/4″ John Guest (JG, Built-In)., Outlet 1/4″ John Guest (JG, Built-In). (in accordance with the US Building Code).
Removal Capabilities Fluoride (95%), Lead (99.9%), heavy metals, chlorine (99.9%), chromium 6, mercury, volatile organic compounds, carcinogens, and other contaminants, as well as turbidity, odors and bad tastes, so you and your family enjoy pure, healthy, spring-fresh water from the tap.
SELECTIVE FILTRATION™ Woder filters have a unique technology that removes over 99.99% of contaminants while leaving in all essential minerals (Reverse osmosis filter out everything, including the minerals your body needs. As far as nutrition goes, experts consider it essentially dead water).
FLOW RATE 1.32GPM @65 psig.
ENJOY TAP WATER AS PURE AND HEALTHY AS SPRING WATER Woder filters are built with materials approved by the National Science Foundation (NSF) and tested by independent laboratories to ANSI standards (American National Standards Institute), so you can have complete confidence in the quality of Woder-filtered water.
Q: What are Woder 10K-FRM-JG-1/4″ Removal Capabilities?
A: This series of in-line filters are all granular formulas. There are 6 different media that are all micro-ground and screened…then blended rather than layered. The formula in the 10K series removes VOCs and Heavy Metals and its bacteriostatic meaning it prevents colonization of any microorganisms within the filter. These are used by many restaurants and by developers of condominium and apartment complexes in the US including GE.
All Woder Filters remove Lead, Heavy metals, Chlorine (99%) and other contaminants (99%), odors and bad tastes. It also removes Mercury, PFCs, Glyphosate, Chromium 6 and turbidity.
VOC’s include the 4 classes of per-fluorocarbons (PFC’s) as follows:
Cyclic, branched, or linear, completely fluorinated alkanes;
Cyclic, branched, or linear, completed fluorinated ethers, with no unsaturations;
Cyclic, branched, or linear, completely fluorinated tertiary-amines with no unsaturations; 4. Sulfur containing perfluorocarbons with no unsaturations and with sulfur bonds only to carbon and fluorine;
VOC may be measured by the referenced method, an equivalent method, an alternate method or by procedures specified under 40 CFR Part 60. A referenced method, an equivalent method, or an alternate method, however, may also measure nonreactive organic compounds. In such cases, an owner or operator may exclude the nonreactive organic compound when determining compliance with a standard.
The surrogate for all VOCs is Chloroform and the Gen II and Gen III formula remove all of Chloroform which allows us to claim the same for all VOCs given the surrogate is the most difficult of all VOCs to remove.
The Woder FRM specialty cartridge reduces Fluoride up to 95% and is also very effective on Arsenic. Woder does not use Silica Alumina or Aluminate to reduce Fluoride.
Note: A Woder Filter utilizes ionic adsorption and exchange technologies among others. TDS meters will pick up the ions and give false readings as TDS. TDS also picks up essential minerals as dissolved solids. Gen3 uses technologies that have a specific affinity for negative constituents found in water but does not remove essential minerals. Deionized water is “dead water” and is not found in nature.
With Woder you enjoy tap water as pure and health as spring water!
A. Write the date of installation on the filter for future references.
B. Turn off water supply valve and place a bucket underneath the water supply line.
C. Cut the Plastic/ Copper water supply line.
D. Push the tubing from the water supply line firmly into the inlet side of the filter and then pull back to tighten. (Inlet side of all models with secure head with a built-in valve is on the left / 5K-JGs and 10K-JGs cap end of the filter is the inlet side!)
E. Activate the filter by gradually turning on the water supply and pointing the outlet of the filter towards the bucket. Allow the water to flow for 3 minutes. DO NOT DRINK THIS WATER. It may contain carbon fines.
F. Turn off water supply again.
G. Push the outlet water line firmly into the outlet portion of the filter and then pull back to tighten.
H. Secure head with a built-in valve in a convenient location under the sink (10K-FRM-JGs, 10K-S-JGs, 5K-FRM-JGs, and 5K-S-JGs) / Secure the bracket in a convenient location under the sink and clamp the filter in (5K-JGs, 10K-JGs)