Woder 10K-Gen3-JG-3/8

Woder 10K-Gen3-JG-3/8

MADE TO LAST LONGER

The Woder 10K-Gen3-JG-3/8 Residential Inline Water Filter removes lead, heavy metals, chlorine (99%), chromium 6, mercury, carcinogens, and other contaminants (99%), as well as turbidity, unpleasant odors and tastes. Enjoy a strong, easy-flowing stream of water.

$109.00 $98.00

9 in stock

9 in stock | Purchase and earn 92 Points!

This filter should be used in conjunction with municipally treated drinking water or water that has been properly disinfected prior use.

  • LASTS FOR A MINIMUM OF 3 YEARS OR 10,000 GALLONS Notes: For longest life, use with municipal treated cold water only, not well water. Do not use with salty or softened water. Connects for use only with cold water for drinking.
  • Main Application Inline Water Filter for All Residential and Commercial Major Brands of Refrigerators, Ice Makers and RVs That Use Standard 3/8” Tubing (Unbraided).
  • FITS JG-3/8” connections (Inline Water Filter) – Fit All 3/8” Plastic Flex Tubing and Flexible Copper Tubing used for water supply to ice makers and refrigerators, etc. 3/8” JG also fit the 1/4” PEX TUBING as its O.D. is the same as 1/4” Tube. DOES NOT FIT BRAIDED HOSES.
  • List of Inventory Filter (Woder Gen3-Q12-R Cartridge), Head with a built-in valve, inlet 3/8″ John Guest (JG, Built-In)., Outlet 3/8″ John Guest (JG, Built-In). (in accordance with the US Building Code).
  • Removal Capabilities Lead (99.9%), heavy metals, chlorine (99.9%), chromium 6, mercury, volatile organic compounds, carcinogens, and other contaminants, as well as turbidity, odors and bad tastes, so you and your family enjoy pure, healthy, spring-fresh water from the tap.
  • SELECTIVE FILTRATION™ Woder filters have a unique technology that removes over 99.99% of contaminants while leaving in all essential minerals (Reverse osmosis filter out everything, including the minerals your body needs. As far as nutrition goes, experts consider it essentially dead water).
  • FLOW RATE 2GPM @65 psig.
  • ENJOY TAP WATER AS PURE AND HEALTHY AS SPRING WATER Woder filters are built with materials approved by the National Science Foundation (NSF) and tested by independent laboratories to ANSI standards (American National Standards Institute), so you can have complete confidence in the quality of Woder-filtered water.

A. Write the date of installation on the filter for future references.

B. Turn off water supply valve and place a bucket underneath the water supply line.

C. Cut the Plastic/ Copper water supply line.

D. Push the tubing from the water supply line firmly into the inlet side of the filter and then pull back to tighten. (Inlet side of all models with secure head with a built-in valve is on the left / 5K-JGs and 10K-JGs cap end of the filter is the inlet side!)

E. Activate the filter by gradually turning on the water supply and pointing the outlet of the filter towards the bucket. Allow the water to flow for 3 minutes. DO NOT DRINK THIS WATER. It may contain carbon fines.

F. Turn off water supply again.

G. Push the outlet water line firmly into the outlet portion of the filter and then pull back to tighten.

H. Secure head with a built-in valve in a convenient location under the sink (10K-FRM-JGs, 10K-S-JGs, 5K-FRM-JGs, and 5K-S-JGs) / Secure the bracket in a convenient location under the sink and clamp the filter in (5K-JGs, 10K-JGs)

I. Turn on the water supply and check for leaks.

Best Value. Best Capacity.

3 Year Comparison
Woder 10K-S-JG-3/8
Product img
$ 46 / 92
1 Woder 10K-S-JG-3/8
$ 92 Per System and Cartridge
$ 46 per Gen3-Q12-R cartridge
OEM Filter
Product img
$ 252
6 OEM Filters
$ 42 per OEM Filter
Mineral Water Bottle
Product img
$ 29,480
75,600 Mineral Water Bottles
$ .39 per Mineral Water Bottle

How Woder Filter affect TDS / PPM in water?

TDS (total dissolved solids) meter is not an effective method to test water quality! It is known to also pick up ions. The filter formula is bacteriostatic. The way bacteriostatic is accomplished is by ion transfer and sharing electrons with any pathogen captured by the filter. The natural cationic media in the filter is active and has no known shelf life which means the filter will emit ions past human existence. . For the record, essential minerals are also picked up by TDS meters In fact, dead water will have the lowest TDS reading and should not be considered good drinking water. All Carbon and other media-based filters increase TDS, while flushing will reduce the value indicated...a bacteriostatic filter will never flush out because of the ionic transfer. Please note the the Woder advantage is Selective Filtration. Woder filters have a unique technology that removes over 99.99% of contaminants while leaving in all essential minerals, which are vital to your health, including calcium, potassium, and magnesium. The unique advanced Selective Filtration™ technology has an affinity for impurities, so it attracts them, but it has no affinity for healthy minerals, so it allows them to remain. When your water is pure yet healthy with essential minerals, it’s the way nature intended drinking water to be. By contrast, residential filters that work with reverse osmosis filter out everything, including the minerals your body needs for good health. As far as nutrition goes, experts consider it essentially dead water.

When it is time to replace the Woder water filter?

When installing the filter, write the date of installation on the filter for future references. Under normal use from municipal water, the Woder filter should not lose water pressure until the end of its capacity as listed. Bear in mind that filters life may vary based on local water conditions or use patterns. For longest life, use with municipal water only, not well water. Do not use with hot, salty, or softened water. Connectors are for cold water use only. The way to determine that the filter has reached its capacity is when the flow decreases dramatically, or when the taste of Chlorine or bad odors become noticeable.

What is the micron rating of this filter?

Granular filters do not have a micron rating. A micron rating is provided for carbon block style filters or filters using pleated membrane materials. These type technologies use nano-sized to larger pore sizes to separate solids from the flow of water. A solid can be anything suspended or dissolved. These solids can include cysts, bacteria and or virus. Woder Filters are all granular formulas. There are 6 different media that are all micro-ground and screened then blended rather than layered. The entry lines are chambered in a way to create maximum retention while only slightly limiting flow rate. The filters formulas are granular, and the technologies are ion exchange and catalytic adsorption. Filters with a micron rating are generally used for well water and or questionable water conditions that include claims to remove microorganisms. Woder filters have a unique technology that removes over 99.99% of contaminants while leaving in all essential minerals, which are vital to your health, including calcium, potassium, and magnesium. The unique advanced Selective Filtration™ technology has an affinity for impurities, so it attracts them, but it has no affinity for healthy minerals, so it allows them to remain.

What Woder Filter do I need?

Capacity: 10K – filters 10,000 gallons of water. 5K – filters 5,000 gallons of water. Fittings: Under Sink (DC – Direct Connect) ‘Direct Connect’ hoses that fit standard 3/8” water valves under US kitchen and bathroom sinks. The 3/8” Direct Connect Hose are made to install directly to the existing cold water valve and faucet stem under your sink. (in accordance with the US Building Code). Refrigerators / Ice Makers RVs (Inline) • JG-1/4” (Inline Water Filter) – Fit All 1/4″ Plastic Flex Tubing and Flexible Copper Tubing used for water supply to ice makers and refrigerators, etc. o JG-1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” Tube. DOES NOT FIT BRAIDED HOSES. • JG-3/8” (Inline Water Filter) – Fit All 3/8” Plastic Flex Tubing and Flexible Copper Tubing used for water supply to ice makers and refrigerators, etc. o JG-3/8” also fits the 1/4” PEX TUBING as its O.D. is the same as 1/4” Tube. DOES NOT FIT BRAIDED HOSES. Types: S-Types (Under sink)/ S-Types (Inline) / FRM (Under sink Fluoride Removal) / FRM (Inline Fluoride Removal) – Come with Head with a built-in valve/s for replacement cartridges. Cap-Types (Under sink) / Cap-Types (Inline) – Cannot get replacement cartridges and must be replaced as a whole unit. Filtration abilities: All models – Eliminates lead (99.9%), heavy metals, chlorine (99.9%), chromium 6, mercury, volatile organic compounds, carcinogens, and other contaminants, as well as turbidity, odors and bad tastes. FRM – Fluoride Removal Dual Stage Filters – Removes up to 95% of Fluoride in addition to the above. Replacement Cartridges: All 5K Models require the Gen3-Q8-R All 5K FRM Models require FRM-Q8-R (1st Stage) and Gen3-Q8-R (2nd Stage) All 10K Models require the Gen3-Q12-R All 10K FRM Models require FRM-Q12-R (1st Stage) and Gen3-Q12-R (2nd Stage)

Are Woder Water Filters BPA (bisphenol A) free?

Yes! All Woder Filters are built with National Science Foundation (NSF) approved material . There is no BPA, PVC, or formaldehyde housing in Woder Water Filters. 

How to Choose a Refrigerator Water Filter?

Fittings:JG-1/4” (Inline Water Filter) – Fit All 1/4″ Plastic Flex Tubing and Flexible Copper Tubing used for water supply to ice makers and refrigerators, etc. JG-1/4” also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” Tube. DOES NOT FIT BRAIDED HOSES. JG-3/8” (Inline Water Filter) – Fit All 3/8” Plastic Flex Tubing and Flexible Copper Tubing used for water supply to ice makers and refrigerators, etc. JG-3/8” also fits the 1/4” PEX TUBING as its O.D. is the same as 1/4” Tube. DOES NOT FIT BRAIDED HOSES. Types: S-Types / FRM (For Fluoride Removal) – Comes with Head (built-in valve/s for replacement cartridges). Can Be DC (under sink) or JG (inline). Cap-Types – Cannot get replacement cartridges and must be replaced as a whole unit. Capacity: 10K – filters 10,000 gallons of water. 5K – filters 5,000 gallons of water. Filtration abilities: All models – Eliminates lead (99.9%), heavy metals, chlorine (99.9%), chromium 6, mercury, volatile organic compounds, carcinogens, and other contaminants, as well as turbidity, odors and bad tastes. FRM – Fluoride Removal Dual Stage Filters – Removes up to 95% of Fluoride in addition to the above. Replacement Cartridges: All 5K Models require Gen3-Q8-R All 5K FRM Models require FRM-Q8-R (1st Stage) and Gen3-Q8-R (2nd Stage) All 10K Models require Gen3-Q12-R All 10K FRM Models require FRM-Q12-R (1st Stage) and Gen3-Q12-R (2nd Stage)

How To Choose My Woder Filter Under My Sink?

Selecting a Woder Filter by its model name. It takes 10 to 15 minutes to install Woder Filters under your sink. No special tools or training required. Woder connects directly to existing, standard plumbing. Capacity: 10K – filters 10,000 gallons of water. 5K – filters 5,000 gallons of water. Fittings: DC – ‘Direct Connect’ hoses that fit standard 3/8” water valves under US kitchen and bathroom sinks. The 3/8” Direct Connect Hose are made to install directly to the existing cold water valve and faucet stem under your sink. Types: S-Types / FRM (For Fluoride Removal) – Come with Head (built-in valve/s for replacement cartridges). Can Be DC (under sink) or JG (inline). Cap-Types – Cannot get replacement cartridges and must be replaced as a whole unit. Filtration abilities: All models – Eliminates lead (99.9%), heavy metals, chlorine (99.9%), chromium 6, mercury, volatile organic compounds, carcinogens, and other contaminants, as well as turbidity, odors and bad tastes, so you and your family enjoy pure, healthy, spring-fresh water from the tap. FRM – Fluoride Removal Dual Stage Filters – Removes up to 95% of Fluoride in addition to the above. Replacement Cartridges: All 5K Models require Gen3-Q8-R All 5K FRM Models require FRM-Q8-R (1st Stage) and Gen3-Q8-R (2nd Stage) All 10K Models require Gen3-Q12-R All 10K FRM Models require FRM-Q12-R (1st Stage) and Gen3-Q12-R (2nd Stage)

How to Choose a Replacement Cartridge for My Woder Filter?

PRISTINE DRINKING WATER ON TAP IN JUST TEN MINUTES. Please Note that Cap-Types (Under sink) / Cap-Types (Inline) – You cannot get replacement cartridges for Cap-Types! The entire unit must be replaced! Here are the required replacement cartridges for each Woder Filter model: 5K (5000 Gallons): All 5K Models require the Gen3-Q8-R. All 5K FRM Models require FRM-Q8-R (1st Stage) and Gen3-Q8-R (2nd Stage). 10K (10,000 Gallons): All 10K Models require the Gen3-Q12-R. All 10K FRM Models require FRM-Q12-R (1st Stage) and Gen3-Q12-R (2nd Stage). Water Filter Bottles: The 24-SUR bottles require 24-SUR-R. The N22B (22oz.) and the N32 (32oz.) require NAL-SUR-R. Shower Head Filter: The SF10S requires SF10S-R.

What’s the expected flow rate?

Flow rate should be: • 3GPM @65psig – For Cap models . • 2GPM @65psig – For Single Cartridge models . • 1.32GPM @65psig – For all FRM models .

Will my Woder Filter will reach its advertised capacity?

Every filter’s life may vary based on local water conditions or use patterns. Incorrect use of the filter or particulate matter in the water can affect its capacity. Causes of shorten life capacity include: • use of the filter with hot water, when it should only be used for drinking water, which is the water that comes from your cold pipeline. • use with unusually dirty municipal water, or with well water. To extend filter’s life capacity , use municipal water only, not well water. These water filters are made for the use of municipal water sources. Do not use with hot, salty, or softened water. The connectors are designed for cold water use only.. Woder Filters and their connectors are built for optimal drinking water. Filters and connectors are not capable for washing and cooking purposes. Review installation instructions for more details. On the inlet side of these filters there is a screen that will get easily clogged up by any type of dirt or settlement from a well. Rust, dirt, sediment or anything that can collect on the screen of the filter will reduce the water pressure. If there is construction around your house where plumbers tie into a waterline, there can be dirt or sediment that gets into the water system that will clog up the screen of the filter. This can happen even miles up the road during any kind of construction. Under normal use from municipal water, the Woder filters should not lose water pressure for approximately three years. The filter functions even when we're not aware of it. Flow rate should be: • 3 GPM at 65psig – For Cap models • 2 GPM at 65psig – For Single Cartridge models • 1.32 GPM at 65psig – For all FRM models

What Woder Filter do I need?

Depends with your application (inline/refrigerator or under the sink) and your filtration needs and existing plumbing. We encourage you to read this article before placing your first order. https://woder.com/what-woder-filter-do-i-need/ . Q: What inline/refrigerator Woder filter do I need? A: Depends with the filtration capacity and existing plumbing. We encourage you to read this article before choosing your next refrigerator / ice machine inline water filter. https://woder.com/what-woder-filter-do-i-need/how-to-choose-a-refrigerator-water-filter-by-its-model-name/. Q: What Under Sink Woder Water Filter do I need? A: There are few factors that you need to be aware of before placing your order for an under the sink Woder water filter. We encourage you to read this article before placing your first order. https://woder.com/what-woder-filter-do-i-need/how-to-choose-my-woder-filter-under-my-sink-by-its-model-name/. Q: How to determine what replacement cartridge is needed for my Woder water filter? A: While there are Woder water filters that are built to be replaced as a whole system (cartridge and hoses), there are Woder water filters systems that need a replacement cartridge only. We encourage you to read this article before placing your first order. https://woder.com/what-woder-filter-do-i-need/how-to-choose-a-replacement-cartridge-for-my-woder-filter/.

What is Woder Filter’s removal capabilities?

The formula removes VOCs and Heavy Metals and its bacteriostatic, which means it prevents colonization of any microorganisms within the filter. All Woder Filters remove Lead, Heavy metals, Chlorine (99%) and other contaminants (99%), odors and bad tastes. It also removes Mercury, PFCs, Glyphosate, Chromium 6 and turbidity. The Gen3 (S-Types) and FRM also remove chloramines. VOC’s include the 4 classes of per-fluorocarbons (PFC's) as follows: 1. Cyclic, branched, or linear, completely fluorinated alkanes; 2. Cyclic, branched, or linear, completed fluorinated ethers, with no unsaturations; 3. Cyclic, branched, or linear, completely fluorinated tertiary-amines with no unsaturations; 4. Sulfur containing perfluorocarbons with no unsaturations and with sulfur bonds only to carbon and fluorine; 5. VOC may be measured by the referenced method, an equivalent method, an alternate method or by procedures specified under 40 CFR Part 60. A referenced method, an equivalent method, or an alternate method may also measure nonreactive organic compounds. In such cases, an owner or operator may exclude the nonreactive organic compound when determining compliance with a standard. The surrogate for all VOCs is Chloroform and the Gen II and Gen III formula remove all of Chloroform which allows us to claim the same for all VOCs given the surrogate is the most difficult of all VOCs to remove. The Woder FRM specialty cartridge reduces Fluoride up to 95% and is also very effective on Arsenic. Woder does not use Silica Alumina or Aluminate to reduce Fluoride. The media is using bone char as part of the components to remove Fluoride. We use silver nitrate for the antibacterial in all our filters. The bacteriostatic media keeps bacteria from growing inside of the filter. The Woder advantage – Selective Filtration™: Woder filters have a unique technology that removes over 99.99% of contaminants while leaving in all essential minerals, which are vital to your health, including calcium, potassium, and magnesium. The unique advanced Selective Filtration™ technology has an affinity for impurities, so it attracts them, but it has no affinity for healthy minerals, so it allows them to remain. With Woder you enjoy tap water as pure and health as spring water!

What is the shelf life of the filter?

Woder filters formula is bacteriostatic. The way bacteriostasis is accomplished is by ion transfer and sharing electrons with any pathogen captured by the filter. The natural cationic media in the filter is active and has no known shelf life which means the filter will emit ions when we are all dead and gone.

Why not using on well or softened water.

On the inlet side of these filters there is a screen that will get easily clogged up by any type of dirt or settlement from a well. These water filters are made for the use of municipal water sources that are not softened. Softened water gets high salt rate that can clogged up the system. Q: Why not using on softened water These water filters are made for the use of municipal water sources that are not softened. Softened water gets high salt rate that can clogged up the system.