Woder Pre-Sedimentation and Advanced Dual Filtration System

Annual Cartridges Cost: $88

SKU: WD-D-20m-G4-JG

Woder (WD) Dual Stage (D) 20 Micron Pre-Sedimentation Removal (20µ) and Gen4 Advanced (G4) Water Filtration System With 1/4″ John Guest (JG) Quick Connect Fittings for 1/4″ Water Supply Lines.

Replacement Cartridges:
1st Stage WD-20m-REP 20 Micron Filtration cartridge.
2nd Stage WD-G4-REP Cartridge.

Installation instructions: PDF

 

IT’S YOUR WATER™

This product can be shipped to the US only.

Original price was: $168.Current price is: $132.

Specifications

Pre-Sedimentation and Advanced Removal (WD-20m-REP + WD-G4-REP)

For households with hard water that do not have an entry-point (whole-house) pre-sedimentation system, high sediment levels can act as carriers for absorbed chemicals and contaminants. Our Sediment Removal Cartridge (Stage 1) is engineered to capture these particulates while protecting the Advanced Filtration Cartridge (Stage 2) from premature clogging.

Our Pre-Sedimentation Removal Cartridge (Stage 1) is engineered to capture these particulates while protecting the Advanced Filtration Cartridge (Stage 2) from premature clogging.

The combination of a WD-20m-REP 20µ sediment removal (First stage) and ADV Filtration facilitates the removal of lead, aluminum, heavy metals, chlorine (99%), contaminants (99%), mercury, PFCs, PFAS, glyphosate, chromium 6, copper, nitrates, turbidity, chloramines, VOCs, odors, bad tastes, sediment, dust, dirt, and contaminants.

Product Specifications:

Product Dimensions: 15.4″ X 7.25″ (12.25″ is needed with the hoses) X 2.52″

Capacity:
WD-20m-REP – 1st stage cartridge – Capacity depends on dirt, sediments and dust levels in your water.
WD-G4-REP – 2nd stage cartridge.

Cartridge lifespan: 1 year under warranty.

System includes: WD-20m-REP cartridge (First stage, capacity depends on dirt, sediments and dust levels) and WD-G4-REP cartridge (Second stage). Head with dual built-in shut off valves, inlet and outlet welded in 1/4″ John Guest fittings. Fits All 1/4″ Plastic Flex Tubing and Flexible Copper Tubing used for water supply to ice makers and refrigerators, etc. 1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” Tube. DOES NOT FIT BRAIDED HOSES.

Removal Capabilities: Our sediment WD-20m-REP cartridge removes sediment, dust, dirt and contaminants. Our Gen4 advanced WD-G4-REP cartridge removes 99.9% of lead, heavy metals, chlorine, chromium 6, mercury, volatile organic compounds, carcinogens, contaminants, turbidity, odor, and bad tastes(claims tested by CLB Labs and are not certified by WQA).

Common applications includes;
Point of use(POU) under sink water filtration system.

Selective Filtration™
Our proprietary Selective Filtration™ technology removes 99.9% of contaminants while leaving in all essential minerals. Reverse Osmosis (RO) filters also remove 99.9% of contaminants, however, RO also remove ALL the minerals found in tap water – including minerals your body needs. RO systems can waste thousands of gallons of water annually while flushing contaminants down the drain.

Dual-Stage Sediment + Advanced Water Filter

The WD-D-20M-G4-JG bundles two cartridges into one setup: a 20-micron mechanical pre-filter ahead of our standard Gen4 Advanced media. It’s a dual stage water filter built specifically for households seeing visible sediment, whether that’s from well water or older plumbing shedding rust and particulate. Rather than running that sediment straight into a Gen4 cartridge and shortening its life, this combo catches it first.

Why Run Two Stages Instead of One

Running two stages instead of one isn’t just extra hardware for its own sake. Sediment is abrasive and can clog filtration media faster than it should, so pulling it out ahead of the Gen4 stage protects that cartridge and typically extends how long it lasts before needing a swap. As a dual stage water filter system, this setup is meant to keep both cartridges doing the job they’re actually built for, rather than asking one filter to handle everything.

Both stages install using John Guest quick-connect fittings on standard quarter-inch lines, matching the same refrigerator, ice-maker, and RV setups the rest of our inline family fits. There’s no difference in install complexity compared to a single-stage filter, you’re just connecting two cartridges in sequence instead of one.

Installation and Cartridge Replacement

Because the two cartridges handle different jobs, they don’t necessarily need replacement on the same schedule. The sediment stage tends to need attention sooner in households with heavier particulate, while the Gen4 stage runs on its usual capacity-based timeline. Checking each cartridge independently rather than assuming they wear out together will get you the most out of both. This filter is designed and packaged in the USA.

Frequently Asked Questions

What does the sediment pre-filter stage do?

It mechanically traps dirt, sand, and rust down to about 20 microns before water reaches the Gen4 Advanced cartridge, protecting that stage from abrasive particulate.

Do both cartridges need to be replaced at the same time?

Not necessarily. The sediment stage often needs replacement sooner in households with heavier particulate, while the Gen4 stage follows its own usage-based schedule, so it’s worth checking them independently.

Will this fit my refrigerator or ice maker?

Yes, both stages use John Guest quick-connect fittings on standard quarter-inch tubing, the same connection type used by most refrigerators, ice makers, and RV water lines.

Shipping & Returns

If you are not entirely satisfied with your purchase, we're here to help.

Our products can be returned within 60 days of the original purchase date. A new product may be exchanged for another product or returned for a refund. A return for a refund will be a subject for 10% restocking fees.

To be eligible for a return, please make sure that the product was purchased in the last 60 days. The product isn't used or damaged. That you obtained a Return Merchandise Number (RMN) from us.

Even if your return and refund request does not meet the return policy requirements, please do not hesitate to contact us to submit an inquiry.

Submit a Returns Inquiry

Frequently Bought Together

Best Sellers

Simple Installation

Clean water in less than 10 minutes.

Video

Clean water in less than 10 minutes.

We’ve made installation easy for a reason: so you’re in control of your water. Get more install tips.

Customer Reviews

Mark T. 20260420

Great flow rate and long-lasting filter. I've been using this for a few months now, and the water quality has been consistently top-notch. Will definitely buy again!

David K. 20260511

Noticeable improvement in water taste right after installation. Very easy to replace!

Sarah M. 20260724

I was worried about calling a plumber, but the installation took under 15 minutes. The water tastes so clean and fresh with zero chlorine smell. Highly recommend for any kitchen!